- Add ports to lag_10.
- Select Switching > LAG > LAG Membership.
A screen similar to the following displays.
- In the LAG ID list, select LAG 1.
- Click Unit 1. The ports display.
- Click the gray boxes under port 2 and 3. Two check marks display in the box.
- Click Apply to save the settings.
- Select Switching > LAG > LAG Membership.
- Add ports to lag_20.
- Select Switching > LAG > LAG Membership.
A screen similar to the following displays.
- Under LAG Membership, in the LAG ID list, select LAG 2.
- Click Unit 1. The ports display.
- Click the gray boxes under ports 8 and 9.
Two check marks display in the boxes.
- Click Apply to save the settings.
- Select Switching > LAG > LAG Membership.
For more information, see the following support articles:
- What are Link Aggression Groups (LAGs) and how do they work with my managed switch?
- How do I add ports to the Link Aggregation Groups (LAGs) using CLI commands on my managed switch?
This article applies to the following managed switches and their respective firmware:
- M5300 - firmware version 10.0.0.x
-
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
- M4100 - firmware version 10.0.1.x
-
- M4100-26G (GSM7224v2h2)
- M4100-50G (GSM7248v2h2)
- M4100-26G-POE (GSM7226Pv1h1)
- M4100-50G-POE+ (GSM7248Pv1h1)
- M4100-26G-POE (FSM7226Pv1h1)
- M4100-50-POE (FSM7250Pv1h1)
- M4100-D12G (GSM5212v1h1)
- M4100-D10-POE (FSM5210Pv1h1)
- M7100 - firmware version 10.0.1.x
-
- M7100-24X (XSM7224)
- XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025
|
Article ID: 21636