New Features:
- Adds the Uninterrupted PoE feature to allow the device to continue to deliver PoE power during a “warm reset.”
- Adds a Power Cycle Port(s) button to reboot connected powered devices (PDs) that display on the PoE Port Configuration page.
Bug Fixes:
- Fixes an issue where the device UI page doesn’t display some information on the System > Management > System Information page if the Japanese language is selected.
Known Issues:
- The admin page is not reachable if the switch is in a 192.168.0.0 subnet and obtains an IP other than 192.168.0.239.
Workaround: Set a DHCP reservation for the switch so that it obtains the IP address 192.168.0.239. If there are multiple switches, then isolate each switch from the network, access each switch at the default IP address 192.168.0.239 and configure with a distinct static IP address in the 192.168.0.0 subnet (these IP addresses should then be excluded from your DHCP scope). Refer to this article for further details. - When you create a DHCP client pool on the DHCP Server page and the binding is set to the manual type, the client identifier can only support MAC addresses.
Workaround: There is no workaround. - You cannot delete all addresses in the list with excluded DHCP server addresses at once.
Workaround: Delete each address individually. - You cannot delete all entries in the list with DHCP IPv6 pools at once.
Workaround: Delete each entry individually. - You cannot delete all server log entries at once.
Workaround: Delete each entry individually.
Download Link: https://www.downloads.netgear.com/files/GDC/MS324TXUP/MS324TXUP_firmware_V1.0.0.25.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.