Bug Fixes
- T-online needs to have a special login fields.
- When log in, the login page should change name DGND3800 to DGND3800B.
- Even the check for the new version upon login is not checked, it checks anyway. IR-119.
- In setup wizard, input password unmatched, the warning message has two punctuations in the end.
- In wireless settings, set 2.4G and 5G SSID begin with space key, the SSIDs displayed in router status without space key.
- In wireless settings, set 2.4G and 5G SSID begin with space key, in profile table, the SSID displayed without space key.
- In wireless settings, profile table displayed profile name as primary, 1, 2, 3, but in configuration, it displayed profile name as profile 1,2,3,4.
- Address reservation: address reservation should allow IP address not include in DHCP server range.
- WDS: when WDS is enabled, the DHCP Server in LAN setup should be disabled.
- Media server: the media server name should be xxx : DGND3800B.
- Address reservation: when add an address reservation and set the device name be blank, the warning message said device name can't be blank two times.
- Port Triggering: The warning message is not accurate when input invalid Port Triggering time-out.
- Port Forwarding: Some warning messages are not accurate when the input is invalid.
- Account Name and test link title is not accurate.
- Change the PPPoE username format to “1und1/xxxxx @online.de.
To Upgrade
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Download the firmware using the button below and save it to a convenient place such as your desktop. Unzip if needed.
For German users only
8.13 MB
- Using a browser, login to the router as admin.
- Under Maintenanceclick Router Upgrade.
- Click Browse and locate the upgrade (.chk) firmware image file you just downloaded
- Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.
Note: Manually reboot router after upgrade completes.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.