The managed AP List displays the status, IP addresses, MAC addresses, model numbers, names, and other information for the managed access points.
To view the status and other information for managed access points:
- Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller.
By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250.
The wireless controller's login screen displays. - Enter your user name and password.
If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. - Click the Login button.
The wireless controller's web management interface opens and displays the Summary screen. - Select Access Point > Managed AP List.
The Managed AP List screen displays. Because this screen is wide, it is shown in the following two figures:
The Managed AP List screen shows the following entries for each access point that you added to the list:
Item Description IP The IP address of the access point. MAC The MAC address of the access point. Model The model of the access point. Name The name of the access point. Status Shows one of the following status options:
• Authentication in progress. This status can last several minutes.
• Applying configurations.
• Firmware upgrade.
• AP is rebooting.
• Connecting. Make sure that a DHCP server is enabled in the network; otherwise, the managed access points remain in the Connecting state and do not enter the Connected state.
• Connected. This status indicates normal operation.
• Not Connected. The wireless controller cannot communicate with the access point at the configured IP address. The wireless controller tries to log in to managed access points each minute. If the error is temporary, the status automatically changes to Connected. If the error is prolonged, verify the access point’s IP address and network connectivity. For more information, see "How do I resolve problems with access points for my ProSAFE Wireless Controller WC7600?Site Shows whether you designated the access point as a local or remote one:
• Local. The access point is designated as a local.
• Remote. The access point is designated as remote.Group Name The default group is basic. For information about changing the group for an access point, see "How do I change access point information on the managed AP list on my ProSAFE Wireless Contoller WC7600? Capability The wireless modes that the access point supports.
Note: Capability information lets you determine which access points are 802.11n
mode capable but function in 802.11g mode.2.4ghz Mode The access point’s wireless modes that function in the 2.4 GHz band. 5ghz Mode The access point’s wireless modes that function in the 5 GHz band.
Last Updated:10/17/2025
|
Article ID: 25263