WNDR3700v4 Firmware Version 1.0.1.42 (Except China & Russia)

New Features & Bug Fixes:

• Win8/Win7 WHQLed.
• Got WiFi certificate.
• Support HDD capacity over 2TB HDD.
• Support USB storage with 4096-byte sector size in GPT partition table.
• Removed WEP passphrase from GUI.
• Fixed AP mode can't be disabled problem after 2.4G radio disabled and reboot system.
• Improved UDP packet loss and fix hang up issue in UDP stress test over Veriwave.
• Bring down the Ethernet LAN physical signal 3 seconds when DHCP server becomes ready to server DHCP clients.     

 

To Install:

Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.

1. Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
2. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
   
   Download Link: http://www.downloads.netgear.com/files/GDC/WNDR3700V4/WNDR3700V4_V1.0.1.42.zip
   
   
3. Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.

Important Note:

1. The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
2. If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade.  After firmware upgrade is done and boots up the system, it changes to steady amber color.
   Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it  may result to a corrupt firmware and cause the device not to work.

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

Last Updated:11/28/2016 | Article ID: 23725