To configure FTP:
1. Select System > Settings > Services.
The Services section of the Setting screen displays (the following figure shows the top of the screen only):
2. Click the FTP button.
The FTP Settings screen displays:
3. Configure the settings as explained in the following table:
|
Item |
Description |
|
|
Enable FTP |
Select the check box to enable FTP globally; clear the check box to disable FTP globally. |
|
|
Port |
Enter the number of the port that is used for FTP control traffic on the ReadyDATA. The default port number is 21. |
|
|
Authentication mode |
Select the authentication mode from the drop-down list:
|
|
|
Allow upload resume |
Select whether users are allowed to resume a paused or stalled upload by making a selection from the drop-down list:
|
|
|
Passive ports |
Enter the beginning port and ending port of the passive port range. This is the port range on the ReadyDATA that is available to clients who initiate a connection to the ReadyDATA. The default range is 32768-65535. |
|
|
Use Masquerade Address |
Select whether the ReadyDATA displays its real IP address or masks this with another IP address or DNS name by making a selection from the drop-down list:
|
|
|
Masquerade as |
Enter a public IP address or DNS name. |
|
4. Click Apply.