- Select Security > Control > Captive Portal > CP Configuration.
A screen similar to the following displays.
- Under Captive Portal Configuration, scroll down and select the CP 1 check box.
Now CP 1 appears in the CP ID field at the top.
- In the Block field, select Enable.
- Click Apply to save the settings.
For more information, see the following support articles:
- What is the captive portal and how does it work with my managed switch?
- How do I block a captive portal instance using CLI commands on my managed switch?
This article applies to the following managed switches and their respective firmware:
- M5300 - firmware version 10.0.0.x
-
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
- XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025
|
Article ID: 22018