- Create VLAN 300.
- Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
- In the VLAN ID field, enter 300.
- Click Add.
- Select Switching > VLAN > Basic > VLAN Configuration.
- Assign all of the ports to VLAN 300.
- Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
- In the VLAN ID list, select 300.
- Click Unit 1. The ports display.
- Click the gray boxes under ports 1 and 24 until U displays.
The U specifies that the egress packet is untagged for the port.
- Click Apply.
- Select Switching > VLAN > Advanced > VLAN Membership.
- Assign PVID to ports 1/0/1 and 1/0/24.
- Select Switching > VLAN > Advanced > Port PVID Configuration.
A screen similar to the following displays.
- Scroll down and select the interface 1/0/1 and 1/0/24 check boxes.
- In the PVID (1 to 4093) field, enter 300.
- Click Apply to save the settings.
- Select Switching > VLAN > Advanced > Port PVID Configuration.
- Enable MLD snooping on the switch.
- Select Routing > Multicast > MLD Snooping > Configuration.
A screen similar to the following displays.
- For MLD Snooping Admin Mode, select the Enable radio button.
- Click Apply.
- Select Routing > Multicast > MLD Snooping > Configuration.
- Enable MLD snooping on the VLAN 300.
- Select Routing > Multicast > MLD Snooping > MLD VLAN Configuration.
A screen similar to the following displays.
- Enter the following information:
- In the VLAN ID field, enter 300.
- In the Admin Mode field, select Enable.
- Select Routing > Multicast > MLD Snooping > MLD VLAN Configuration.
- Click Add.
For more information, see the following support articles:
- What is Multicast Listener Discovery (MLD) snooping and how does it work with my managed switch?
- How do I configure Multicast Listener Discovery (MLD) snooping using CLI commands on my managed switch?
This article applies to the following managed switches and their respective firmware:
- M5300 - firmware version 10.0.0.x
-
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
- XSM7224S - firmware version 9.0.1.x (license required to support the feature described in this article)
Last Updated:07/07/2025
|
Article ID: 21999