Enterprise AV Home WiFi Mobile Wifi Support Shop Deals
  1. Create one VLAN 192 including PC 1 and PC 2.

    (Netgear Switch) #vlan database
    (Netgear Switch) #vlan 192
    (Netgear Switch) #vlan routing 192
    (Netgear Switch) #exit
    (Netgear Switch) #configure
    (Netgear Switch) (Config)#interface 1/0/23
    (Netgear Switch) (Interface 1/0/23)#vlan pvid 192
    (Netgear Switch) (Interface 1/0/23)#vlan participation include 192
    (Netgear Switch) (Interface 1/0/23)#exit
    (Netgear Switch) (Config)#interface 1/0/24
    (Netgear Switch) (Interface 1/0/24)#vlan pvid 192
    (Netgear Switch) (Interface 1/0/24)#vlan participation include 192
    (Netgear Switch) (Interface 1/0/24)#exit
    (Netgear Switch) (Interface-vlan 192)#interface vlan 192
    (Netgear Switch) (Interface-vlan 192)#routing
    (Netgear Switch) (Interface-vlan 192)#ip address 192.168.1.254 255.255.255.0
    (Netgear Switch) (Interface-vlan 192)#exit
     
  2. Create one VLAN 202 connected to the Internet.

    (Netgear Switch) #vlan database
    (Netgear Switch) (Vlan)#vlan 202
    (Netgear Switch) (Vlan)#vlan routing 202
    (Netgear Switch) (Vlan)#exit
    (Netgear Switch) #configure
    (Netgear Switch) (Config)#interface 1/0/48
    (Netgear Switch) (Interface 1/0/48)#vlan pvid 202
    (Netgear Switch) (Interface 1/0/48)#vlan participation include 202
    (Netgear Switch) (Interface 1/0/48)#exit
    (Netgear Switch) (Config)#interface vlan 202
    (Netgear Switch) (Interface-vlan 202)#routing
    (Netgear Switch) (Interface-vlan 202)ip address 10.100.5.34 255.255.255.0
    (Netgear Switch) (Interface-vlan 202)#exit
     
  3. Create a DHCP pool to allocated IP addresses to PCs.

    (Netgear Switch) (config)#service dhcp
    (Netgear Switch) (config)#ip dhcp pool pool-a
    (Netgear Switch) (Config-dhcp-pool)#dns-server 12.7.210.170
    (Netgear Switch) (Config-dhcp-pool)#default-router 192.168.1.254
    (Netgear Switch) (Config-dhcp-pool)#network 192.168.1.0 255.255.255.0
    (Netgear Switch) (Config-dhcp-pool)#exit
     
  4. Enable IP routing and configure a default route.

    (Netgear Switch)(config)#ip routing
    (Netgear Switch)(config)#ip route 0.0.0.0 0.0.0.0 10.100.5.252
     
  5. Enable a protected port on 1/0/23 and 1/0/24.

    (Netgear Switch) (Config)#interface 1/0/23
    (Netgear Switch) (Interface 1/0/23)#switchport protected
    (Netgear Switch) (Interface 1/0/23)#exit
    (Netgear Switch) (Config)#interface 1/0/24
    (Netgear Switch) (Interface 1/0/24)#switchport protected
    (Netgear Switch) (Interface 1/0/24)#exit


For more information, see the following support articles:

 

 

This article applies to the following managed switches and their respective firmware:

 

 

  • M5300 - firmware version 10.0.0.x
    • M5300-28G (GSM7228S)
    • M5300-5G (GSM7252S)
    • M5300-28G3 (GSM7328Sv2h2)
    • M5300-52G3 (GSM7352Sv2h2)
    • M5300-28G_POE+ (GSM7228PSv1h2)
    • M5300-52G-POE+ (GSM7252PSv1h2)
    • M5300-28GF3 (GSM7328FSv2)
  • M4100 - firmware version 10.0.1.x
    • M4100-26G (GSM7224v2h2)
    • M4100-50G (GSM7248v2h2)
    • M4100-26G-POE (GSM7226Pv1h1)
    • M4100-50G-POE+ (GSM7248Pv1h1)
    • M4100-26G-POE (FSM7226Pv1h1)
    • M4100-50-POE (FSM7250Pv1h1)
    • M4100-D12G (GSM5212v1h1)
    • M4100-D10-POE (FSM5210Pv1h1)
  • M7100 - firmware version 10.0.1.x
    • M7100-24X (XSM7224)
  • XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025 | Article ID: 21794

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email