Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

The following figure shows an OSPF sample network.

Image

  1. Enable IP routing on the switch.
    1. Select Routing > IP > Basic > IP Configuration.

      A screen similar to the following displays.

      Image
       
    2. For Routing Mode, select the Enable radio button.
    3. Click Apply to save the settings.
       
  2. Assign IP address 192.150.2.2 to port 1/0/2.
    1. Select Routing > IP > Advanced > IP Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Scroll down and select the interface 1/0/2 check box.

      Now 1/0/2 appears in the Interface field at the top.
       
    3. Enter the following information:
      • In the IP Address field, enter 192.150.2.2.
      • In the Network Mask field, enter 255.255.255.0.
      • In the Admin Mode field, select Enable.
         
    4. Click Apply to save the settings.
       
  3. Assign IP address 192.130.3.1 to port 1/0/3:
    1. Select Routing > IP > Advanced > IP Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Scroll down and select the interface 1/0/3 check box.

      Now 1/0/3 appears in the Interface field at the top.
       
    3. Enter the following information:
      • In the IP Address field, enter 192.130.3.1.
      • In the Network Mask field, enter 255.255.255.0.
      • In the Admin Mode field, select Enable.
         
    4. Click Apply to save the settings.
       
  4. Assign IP address 192.64.4.1 to port 1/0/4.
    1. Select Routing > IP > Advanced > IP Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Scroll down and select the interface 1/0/4 check box.

      Now 1/0/4 appears in the Interface field at the top.
       
    3. Enter the following information:
      • In the IP Address field, enter 192.64.4.1.
      • In the Network Mask field, enter 255.255.255.0.
      • In the Admin Mode field, select Enable.
         
    4. Click Apply to save the settings.
       
  5. Specify the router ID, and enable OSPF for the switch.
    1. Select Routing > OSPF > Advanced > OSPF Configuration.

      A screen similar to the following displays.

      Image
       
    2. Under OSPF Configuration, enter the following information:
      • In the Router ID field, enter 192.130.1.1.
      • In the OSPF Admin Mode field, select Enable .
      • In the RFC 1583 Compatibility field, select Disable.
         
    3. Click Apply to save the settings.
       
  6. Enable OSPF on the port 1/0/2.
    1. Select Routing > OSPF > Advanced > Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Under Interface Configuration, scroll down and select the interface 1/0/2 check box.

      Now 1/0/2 appears in the Interface field at the top.
       
      • In the OSPF Area ID field, enter 0.0.0.2.
      • In the OSPF Admin Mode field, select Enable.
      • In the Router Priority (0 to 255) field, enter 128.
      • In the Metric Cost field, enter 32.
         
    3. Click Apply to save the settings.
       
  7. Enable OSPF on port 1/0/3.
    1. Select Routing > OSPF > Advanced > Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Under Interface Configuration, scroll down and select the interface 1/0/3 check box.

      Now 1/0/3 appears in the Interface field at the top.
      • In the OSPF Area ID field, enter 0.0.0.3.
      • In the OSPF Admin Mode field, select Enable.
      • In the Priority field, enter 255.
      • In the Metric Cost field, enter 64.
         
    3. Click Apply to save the settings.
       
  8. Enable OSPF on port 1/0/4.
    1. Select Routing > OSPF > Advanced > Interface Configuration.

      A screen similar to the following displays.

      Image
       
    2. Under Interface Configuration, scroll down and select the interface 1/0/4 check box.

      Now 1/0/4 appears in the Interface field at the top.
       
      • In the OSPF Area ID field, enter 0.0.0.2.
      • In the OSPF Admin Mode field, select the Enable.
      • In the Priority field, enter 255.
      • In the Metric Cost field, enter 64.
         
    3. Click Apply to save the settings.


For more information, see the following support articles:

 

 

This article applies to the following managed switches and their respective firmware:

 

 

  • M5300 - firmware version 10.0.0.x
    • M5300-28G (GSM7228S)
    • M5300-5G (GSM7252S)
    • M5300-28G3 (GSM7328Sv2h2)
    • M5300-52G3 (GSM7352Sv2h2)
    • M5300-28G_POE+ (GSM7228PSv1h2)
    • M5300-52G-POE+ (GSM7252PSv1h2)
    • M5300-28GF3 (GSM7328FSv2)
  • XSM7224S - firmware version 9.0.1.x (license required to support the feature described in this article)
 

 

Last Updated:07/07/2025 | Article ID: 21680

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email