Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

Create two protocol VLAN groups. One is for IPX, and the other is for IP/ARP. The untagged IPX packets are assigned to VLAN 4, and the untagged IP/ARP packets are assigned to VLAN 5.

 

  1. Create the protocol-based VLAN group vlan_ipx.
    1. Select Switching > VLAN > Advanced > Protocol Based VLAN Group Configuration.

      A screen similar to the following displays.

      Image


      Enter the following information:
      • In the Group Name field, enter vlan_ipx.
      • In the Protocol list, select IPX.
      • In the VLAN ID field, enter 4.
         
    2. Click Add.
       
  2. Create the protocol-based VLAN group vlan_ip.
    1. Select Switching > VLAN >Advanced > Protocol Based VLAN Group Configuration.

      A screen similar to the following displays.

      Image
       
    2. Enter the following information:
      • In the Group Name field, enter vlan_ip.
      • In the Protocol list, select IP and ARP while holding down the Ctrl key.
      • In the VLAN field, enter 5.
         
    3. Click Add.
       
  3. Add port 11 to the group vlan_ipx.
    1. Select Switching > VLAN > Advanced > Protocol Based VLAN Group Membership.

      A screen similar to the following displays.

      Image
       
    2. In the Group ID list, select 1.
    3. Click the gray box under port 11. A check mark displays in the box.
    4. Click the Apply button.
       
  4. Add port 11 to the group vlan_ip.
    1. Select Switching > VLAN > Advanced > Protocol Based VLAN Group Membership.

      A screen similar to the following displays.

      Image

    2. In the Group ID list, select 2.
    3. Click the gray box under port 11. A check mark displays in the box.
    4. Click Apply.

 


For more information, see the following support articles:

 

 

This article applies to the following managed switches and their respective firmware:

 

 

  • M5300 - firmware version 10.0.0.x
    • M5300-28G (GSM7228S)
    • M5300-5G (GSM7252S)
    • M5300-28G3 (GSM7328Sv2h2)
    • M5300-52G3 (GSM7352Sv2h2)
    • M5300-28G_POE+ (GSM7228PSv1h2)
    • M5300-52G-POE+ (GSM7252PSv1h2)
    • M5300-28GF3 (GSM7328FSv2)
  • M4100 - firmware version 10.0.1.x
    • M4100-26G (GSM7224v2h2)
    • M4100-50G (GSM7248v2h2)
    • M4100-26G-POE (GSM7226Pv1h1)
    • M4100-50G-POE+ (GSM7248Pv1h1)
    • M4100-26G-POE (FSM7226Pv1h1)
    • M4100-50-POE (FSM7250Pv1h1)
    • M4100-D12G (GSM5212v1h1)
    • M4100-D10-POE (FSM5210Pv1h1)
  • M7100 - firmware version 10.0.1.x
    • M7100-24X (XSM7224)
  • XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025 | Article ID: 21602

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email