WAC104 Firmware Version 1.0.4.1

NOTE:
Before upgrading firmware to V1.0.4.1 from previous version, please follow mandatory steps below,

Backup configuration file -> factory defaults after upgrade -> restore the configuration file to avoid configuration getting lost.
Clear the browser cache.

New Features and Enhancements:

Known Issues:

Attached Device wireless station list page displays the 2.4GHz / 5GHz SSID on which WDS is established, instead of showing exact SSID on which wireless station is associated with partner AP.

Notes:

By Default DHCP client is disabled. The AP's default IP address is 192.168.0.100.
AP can be accessed using the default IP address when AP does not get DHCP client IPaddress after enabling DHCP client feature.
AP can be returned to factory default using the reset button at the back of the AP by pressing and holding the button for ~10 secs (Power LED will blink in green from solid green).
In the following scenarios AP is expected to reboot automatically for the configuration to take effect:
a.     Firmware upgrade
b.     Reset factory defaults
c.     Restore configuration

In all the other conditions AP is not supposed to reboot automatically.

Last Updated:10/17/2025 | Article ID: 31242