New Features and Enhancements:
- Initial Release
Upgrade Instructions:
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/WC7600v2/WC7600V2_FW_V6.0.1.3.zip - Log into the WC7600v2.
- Make a backup of the current running configuration from Maintenance > Backup/Restore and select BACKUP button.
- Select Maintenance > Upgrade from the main/submenu.
- In the Firmware Upgrade section, select Local File and click Browse.
- Locate the downloaded file and click Apply.This will start the software upgrade to your WC7600v2. This may take some time. Do not interrupt the upgrade process. At the conclusion of the upgrade, your WC7600v2 will reboot.
- In case of stacked and redundancy configurations, please follow the below steps:
- Upgrade the redundant controller first if available. Wait for the redundant controller to upgrade successfully and come back active.
- Then upgrade in the order Secondary 2, Secondary 1 and Primary controller.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR Open Source GPL. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.
Last Updated:10/17/2025
|
Article ID: 31062