New Features and Enhancements
- Adds a step to the installation wizard that lets the user change the web GUI login password.
- When WAN access for ReadySHARE is enabled, password protection is enabled by default for WAN access to a USB storage device.
- Includes a Geek Squad technical support tool enhancement.
Bug Fixes
- Fixed the issue in which the password recovery mechanism might disclose the password recovery token. A hacker can use this token to get the web login password
Firmware Upgrade Instruction
Note: To avoid wireless disconnect issues during the firmware download process, NETGEAR recommends that the firmware upgrade be performed on a computer with a wired connection.
- Write down all the settings that were changed from the default values as you may need to re-enter them manually.
- Using the download link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is R7300-V1.0.0.44_1.0.12.chk
Download Link: http://www.downloads.netgear.com/files/GDC/R7300DST/R7300-V1.0.0.44_1.0.12.zip
- Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
- Click ADVANCED tab > Administration > Firmware Upgrade.
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.
Important Note:
- The upgrade process is complete when the on screen progress bar completes. If the power LED light turns amber and blinks, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn't display correctly during the firmware upgrade, you can still check the status using the Power LED. The Power LED should be blinking (amber) during firmware upgrade. After the firmware upgrade is complete and the system boots up, it changes to a steady amber color.
- Please DO NOT power off or reboot the device during the firmware upgrade, otherwise, it may result in corrupt firmware and cause the device not to work.
Last Updated:10/17/2025
|
Article ID: 30959