XS748T supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades.
Bug Fixes:
- Fixed the problem where the FAN failure LED can get turned on incorrectly, when ambient temperature is higher than 45oC, even though the fans are working fine.
Known Issues:
- GUI freezes when session is timeout by HTTPS using IE11.0
[Workaround]: use other browsers, or refresh the whole page after timeout - If the connecting partner device is 1000M, port speed on partner device would show up as 10Mbps after disabling the port on XS748T.
[Workaround]: Unplug the cable - Registration page displays again after turning it off and switch reboot.
[Workaround]: Close registration window right after connecting to device via GUI; or register the device correctly.
Notes and Limitations :
- Cable test is effective for copper ports linked up as 10G, using Cat5e cables. With other link speeds and cable types, the results are unpredictable.
- The USB device must support the FAT32 file type. The NTFS file type is NOT supported
Download link: http://www.downloads.netgear.com/files/GDC/XS748T/XS748T_V6.5.1.25.zip
Last Updated:10/17/2025
|
Article ID: 30825