New Features and Enhancements:
- Initial Release.
The XS708T/XS716T is an 8/16 ports 10G Ethernet ProSAFE® Smart Managed Switch. It supports 8/16 copper 10GBASE-T ports with two combo ports supporting 1G or 10-Gigabit SFP+ fiber ports.
XS708T/XS716T support the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades.
Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/XS708T/XS708T_XS716T_FW_V6.6.0.11.zip
Notes:
- Switch FAN will run at maximum speed during the boot stage (for about 2 minutes) after power cycle; then the speed will change based on its internal device temperature.
- The USB storage device that you attach to the USB port must comply with the following requirements:
- The USB device must support USB 2.0.
- The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.
Last Updated:10/17/2025
|
Article ID: 30614