A DST network allows you to install or add a DST adapter in another part of your house or office to enhance wireless coverage or additional Ethernet port. This article helps you add a DST adapter to a DST network.
To add a DST adapter to a DST network:
- Go to the room where you want to improve your wireless coverage or add an Ethernet connection.
- Plug the DST adapter into an electrical outlet and wait for the power LED to turn on. If the power LED does not turn on, slide the Power On/Off switch to On position.
- Press the WPS and DST Router Sync button on the DST adapter for 2 seconds.
- Within two minutes, press the WPS and DST Adapter Sync button on the DST router.
- Wait for the Power LEDs and DST LEDs on the DST router and DST adapter to stop blinking. The DST LED on the router becomes solid blue and the DST LED on the adapter becomes green or amber.
- To set a DST Wi-Fi password, see Setting up a secure DST Wi-Fi network
Your DST adapter is now successfully connected to your DST network.
Last Updated:07/07/2025
|
Article ID: 29922