Fixed Issues
-
,
- Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer ,
- Fixed the issue where ‘Wake on Lan’ doesn’t work when LACP LAG is configured on that port ,
- Fixed the issue where DHCP discover packet is sent incorrectly from the switch with source IP other than 0.0.0.0
Known issues
- Warning messages pop up when the HTTPS admin status is enabled.
[Workaround]: Refresh the GUI screen. - The cable test results sometimes show a much longer value.
[Workaround]: Redo the cable test on the same port.
Notes :
-
,
- The released zip contains switch firmware (.stk) and MIB files. User needs to unzip it to retrieve the switch image itself for upgrade.
Limitations
-
,
- It is NOT supported for configuration migration from older devices GS716Tv2/GS724Tv3/GS748Tv4 to new devices GS716Tv3/GS724Tv4/GS748Tv5. ,
- The boot time for GS716Tv3/GS724Tv4/GS748Tv5 is about 40 seconds longer than GS716Tv2/GS724Tv3/GS748Tv4. ,
- During the boot time (about 2 minutes), all LED lights on for GS716Tv3 and GS724Tv4. This is working as HW design.
Download and unzip the new file from the NETGEAR Download Center by clicking the following URL.
Download Link: http://www.downloads.netgear.com/files/GDC/GS716TV3/GS716_724_748T_FW_V6.3.1.11.zip
The filename after unzipping is gs7xxt-v6.3.1.9.stk.
Last Updated:10/17/2025
|
Article ID: 29409