Fixed Issues and Modification
-
,
- Fixed the issue where device view does not work after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer. ,
- Fixed the issue when fan #2 is stopped, instead of turning on the FAN failure LED, power LED changes from green to yellow ,
- Fixed the issue where unrealistic high temperature (255C) is displayed through debugging telnet session ,
- Messages of “Error 1 occurred reading fan” are observed ,
- Warning messages are observed when creating VLAN and adding ports to VLAN
Notes :
-
,
- The released zip contains switch firmware (.stk) and MIB files. User needs to unzip it to retrieve the switch image itself for upgrade.
Limitations
- Packet counter of 10G port does get incremented if packets with frame size greater than 64 bytes and Ether-Type set to “none”. This should not have any impact on real application since L2 packets should have valid ether-type and length information.
Download link: http://www.downloads.netgear.com/files/GDC/XS712T/XS712T_V6.1.0.34.zip
Last Updated:10/17/2025
|
Article ID: 29408