New Features & Enhancements
-
,
- When Russia is selected for the Country/Region, only U-NII-1 and U-NII-2A bands for 5GHz are enabled ,
- Adjusted 5GHz channel for Australia, New Zealand and CE Countries ,
- Forced user to change default password after login to the device for the first time
Bug Fixes
-
,
- Fixed the issue of multiple browser - Clicking on Cancel still login into AP UI ,
- Fixed the issue When Dynamic 20 / 40 channel width is selected for Russia country, it’s not applying from local UI ,
- Fixed the issue where unable to set shared Key as network authentication and passphrase other than alphabets are NOT taking
Known Issues:
-
,
- PING failure is observed over point-to-point WDS connection between WND930 & WNDAP660 when WPA2-PSK authentication is used ,
- 5 GHz radio WDS link between WND930 and WNDAP360 AP with OPEN-NONE / WPA2-PSK authentication is not working with 20MHz and 40Mhz channel width ,
- Wireless stations not getting IP address when Remote MAC Authentication enabled with WPA2 RADIUS authentication
NOTES:
-
,
- The default IP address of the AP is 192.168.0.100 if DHCP server is not present.
-
,
- In the following scenarios, AP is expected to reboot automatically for the configuration to take affect.
,
-
,,
- Change of Country/Region ,,
- After Firmware upgrade ,,
- After Restore Configuration Settings ,,
- Reset factory defaults ,
In all the other conditions AP is not supposed to reboot automatically.
Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is WND930_V2.0.4_firmware.tar
Download Link: http://www.downloads.netgear.com/files/GDC/WND930/WND930_V2.0.4_firmware.zip
Last Updated:10/17/2025
|
Article ID: 29407