New Features & Enhancements
- Updated Firmware for compliance to the new regulatory EN300-328.1.8.1
- Changed the language version to 1.0.0.12
Bug Fixes
- Keeps only the last email content in dead letter file when email cannot be sent
- Disabled SSL2 and SSL3 which has POODLE vulnerability issue
- Applied patches for Adaptive to Realtek
- Corrected PPPoA/PPPoE password has to be hidden, but changes to text mode when you focus on
- Port Forwarding should be able to accept the different external port mapping to the same internal port
- Modified the wizard for DHCP server detection.
- NAT function is only performed for the devices which are on the router’s LAN side and have the same subnet address as the router’s LAN
- Fixed SOAP SSID/Key setting for XSS protection mapping 8 special words
- Fixed the Attached Devices page cannot show connection type when device connected to guest network
- Fixed PPPoA mode, the "Round up data volume for each connection by" field will gray out issue
Known Issues
- The Windows/MAC genie application will scan devices (by sending ARP packets) and update the network map automatically. It will cause some wireless devices show as wired connection type for a while (until the application update the network map from the router).
- Sometimes the attached devices feature cannot get some wireless devices. (It caused by ARP packet loss).
To Upgrade
-
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is DGN1000v3-V1.0.0.20_0.0.20.img
Download Link: http://www.downloads.netgear.com/files/GDC/DGN1000V3/DGN1000v3-V1.0.0.20_0.0.20.zip
- Using a web browser, login to the router as admin.
- Under Maintenance click Router Upgrade.
- Click Browse and locate the upgrade file DGN1000v3-V1.0.0.14_0.0.14.img.
- Click Upload.
- Wait for the upgrade progress bar to complete and final prompt to appear.
If problems occur after upgrading, try clearing the configuration by pressing the Factory Defaults push button on the rear panel until the Test LED blinks (about 5 seconds). Then reenter your configuration information manually
.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.