You can import a list of known access points from a saved file. Create a text file that includes the MAC address of each access point, one MAC address per line. The wireless controller can support a total of up to 512 access points from the known and unknown lists combined.
»To import a list of known access points from a file:
- Create a text file that includes a list of MAC addresses for the access points. Each MAC address should be on a separate line with hard returns between lines as shown in the following example:
00:00:11:11:22:29
00:00:11:11:22:28
00:00:11:11:22:27
00:00:11:11:22:26
00:00:11:11:22:25 - Open a web browser. In the browser’s address field, type the http:// followed by the IP address that you assigned to the wireless controller.
By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250.
The wireless controller’s login screen displays. - Enter your user name and password.
If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. - Click the Login button.
The wireless controller’s web management interface opens and displays the Summary screen. - Select Configuration > Security > Advanced > Rogue AP.
The advanced Rogue AP screen displays. - Click the Browse button, navigate to the file containing the list of known access points, and select it.
- Next to Import Known List, select one of the following radio buttons:
• Merge. Merges the list of access points that you intend to import with the access points that are already present in the Rogue List.
• Replace. Replaces the access points that are present in the Rogue List with the access points in the file that you intend to import. - Click the Import button.
The wireless controller imports the MAC addresses that are in the text file into the Rogue List table. - Click the Apply button.
Last Updated:10/17/2025
|
Article ID: 25709