Because not everyone uses Dynamic QoS, it is disabled by default.
To enable Dynamic QoS:
- Launch a web browser from a computer or mobile device that is connected to your router’s network.
- Enter http://www.routerlogin.net.
A login window opens. - Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays. - Select Dynamic DoS.
- Select the Enable Dynamic QoS check box.
- Specify your Internet bandwidth.
You must specify your Internet bandwidth so that Dynamic QoS can perform bandwidth allocation and traffic prioritization.
To allow Speedtest to detect your Internet bandwidth (recommended), do the following:- For more accurate Speedtest results, make sure that no other devices are accessing the Internet.
- Click the Speedtest button.
Speedtest determines your Internet bandwidth.
- Click the Apply button.
Your settings are saved.
A link displays on the bottom of the page to view bandwidth utilization. Clicking the link displays the Attached Devices page.
Last Updated:07/07/2025
|
Article ID: 25598