New Features & Enhancements:
- Initial Release
Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
The Firmware File name after extracting is WAC120_V2.0.2_firmware.tar
Download Link: http://www.downloads.netgear.com/files/GDC/WAC120/WAC120_V2.0.2.zip
NOTES:
- The default IP address of the AP is 192.168.0.100
- In the following scenarios, AP is expected to reboot automatically for the configuration to take effect.
- Change of Country/Region
- After Firmware upgrade
- After Restore Configuration Settings
- Reset factory defaults
- Change the mode from AP to Client and vice versa
- Following features are supported in WAC120:
- 11ac
- DHCP Client
- NTP Client
- WMM Priority Support
- WMM Power Save Support
- Band Steering
- Radio On-Off Support
- WPS Support (Push button and PIN method)
- WDS Support (WDS doesn’t work on this version.)
- Wireless Client Mode (currently some issues are there)
- Syslog Support
- Product Registration
- Security (Open WEP, WPA2-PSK, mixed WPA/WPA2-PSK)
- WAC120 can operate in either AP or Client mode at any given time but not as both
Last Updated:10/17/2025
|
Article ID: 25430