Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
Enhancements:
- Fixes TCP port 32764 issue
- Bootloader supports WINBOND flash
- Passes Win8 logo
- Fixed: use mobile genie to enable traffic meter, after limit reach, no hijack
- Fixed: use PC genie tool to reboot, device will reboot two times
- Hidden WPA in GUI
- Renamed passphrase to network key
Bug Fixes:
- Disabled WPS Wizard in WEP
- Garbage room HTTP auth issue
- Shows success page in different language
To Install:
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is PR2000-V1.0.0.10_1.0.1.img
Download Link: http://www.downloads.netgear.com/files/GDC/PR2000/PR2000_V1.0.0.10_1.0.1.zip
- Log in to the router using a Web browser. The URL is http://192.168.168.1 ( if you did not change the router’s IP address ).
- Click Maintenance > Router Upgrade
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.
Important Note:
Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupted firmware and cause the device not to work.
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page