Bug Fixes:
- Fixed the issue that some configuration settings do not take effect after downloading the configuration file until the device is rebooted manually.
- Fixed the problem that LAG interface cannot be selected as Source or Destination Port Members in Security > Traffic Control > MAC Filter > MAC Filer Configuration page.
- Fixed the issue that when an FS728TPv2 and 2 layer 3 switches form VRRP network, FS728TPv2 can’t be managed once the active connection is broken and the backup connection becomes active.
- Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0.
- Fixed the issue that SNMPv3 Engine ID is not unique.
Known issues:
- While the link is up, port cannot be removed from a VLAN if it is also member of a LAG.
Workaround: Remove the link or remove the port from the LAG first. - After setting the maximum number of allowed static locked MAC address to zero (under Security > Traffic Control > Port Security > Interface Configuration), no static MAC address can be added even when port security is disabled.
Workaround: Change back the "Max Allowed Statically Locked MAC" from 0 to 20. - Can’t remove a policy entry completely in the table under QoS > Diffserv > Advanced > Policy Configuration the first time.
Workaround: Need to select the same entry and click DELETE again
Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is FS728TPv2_v5.0.2.39.stk
Download Link: http://www.downloads.netgear.com/files/GDC/FS728TPv2/FS728TPv2_v5.0.2.39.zip
Last Updated:10/17/2025
|
Article ID: 25025