Fixed issues:
- Switch cannot be accessed via WEB GUI after running some time.
- Switch loses connection to SNTP
- Auto-VoIP messages of 'send failed'
- Voice vlan affect the PVID of port when Voice device is connected
- Switch reboots 2 times after after about 15 minutes
- Need to have a way to create and download the techsupport file via web page for TPS switch
- Problems with the Status LEDs
- Error logs are continuously logged in memory every few seconds
- Failed to configure VLAN port membership through SNMP(Macmon)
Known issues:
- Port is incorrectly up when insert 100BaseFX SFP module to port 25/26 (GS728TS/TPS) or port 49/50 (GS752TS/TPS).
[Workaround] The 100Base-FX SFP module is not supported on port 25/26 of GS728TS and GS728TPS or port 49/50 of GS752TS and GS752TPS. Those ports only support 1Gbps SFPs or 10Gbps SFPs. The 100BaseFX optic can be used on the rest of SFP ports on these platforms.
Notes:
- This firmware release support dual firmware image. Before upgrade a stack system, please make sure that the ‘Next-active’ field under ‘Maintenance > File Management > Dual Image status’ pages are the same. They should be set to ‘image1’ as factory default.
- NETGEAR 10G SFP+ AXM761/762/763 can be used for long-distance stacking for GS7xxTS/TPS. However, the stacking bandwidth is still 2.5G per port.
Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/GS728TPS/GS7xxTS_TPS_5.3.0.25-Firmware-version.zip
Last Updated:10/17/2025
|
Article ID: 24922