Bug Fixes:
- PPPoE can't reconnect after quick unplug and plug ADSL line.
- Wireless clients cannot achieve the correct link speed from the DGN2200v4 when set to wireless modes of 145 Mbps or 300 Mbps.
- Respond to IGD requests ONLY when upnp is enabled.
- Don't run traffic meter in AP/sta/WDS repeater mode.
- When "turn UPnP on" is unchecked, SOAP server in the gateway will stop working too.
- Added GPL notification link.
To Upgrade:
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is DGN2200v4-V1.0.0.24_5.0.8.chk
Download Link: http://www.downloads.netgear.com/files/GDC/DGN2200V4/DGN2200v4_V1.0.0.24_5.0.8.zip
- Using a browser, login to the router as admin.
- Under Maintenance click Router Upgrade.
- Click Browse and locate the upgrade (.chk) firmware file you just downloaded
- Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.