Published December 17, 2013
New Features:
- Chinese localization support.
- Support for WNDAP380Rv2 Access Point.
- Support for WNAP210v2 Access Point.
Bug Fixes:
- Fix for reboot issue under excessive console dump.
- Scheduled Radio On/Off feature fixed.
- Re-authentication for the Radius server fixed for the configured value.
- RFID information is not forwarded to server from the controller.
- Standalone AP firmware upgrade fails when Controller is in non-default VLAN and APs are in default VLAN.
- Data connectivity issues resolved while wireless client roams across multiple AP's as well as within same AP on different radio band i.e. 2.4 GHz and 5GHz.
Known Issues:
- L3 roaming will have impact if the Managed APs change IP address after tunnels are established.
- In a working environment with External Radius Authentication, if the Authentication server is changed from External to Internal Authentication, immediately after the change clients cold connect using the older security cache. If the client disconnect to timeout, new authentication will be done.
- After APs are removed from managed list they must be rebooted to stop broadcasting the previously configured SSIDs.
- Internal Radius server will not function as expected while importing certificates created using openssl higher than version 9.81.
- Upgrading 380Rv2 from managed to standalone need an intermediate firmware upgrade.
- Standalone APs needs to be converted to Managed image before deploying them as remote APs.
- Occasionally WNAP210v1 hangs and require manual reboot of WNAP210.
- Occasionally there are silent reboot of Access Points managed by WC7520.
Upgrade Instructions:
- Download the file below and save it to a convenient place such as your desktop.
- Log into the WC7520
- Select Maintenance > Upgrade from the main/submenu.
- In the Firmware Upgrade section, select Local File and click Browse.
- Locate the downloaded file and click Apply.
This will start the software upgrade to your WC7520. This may take some time. Do not interrupt the upgrade process.
At the conclusion of the upgrade, your WC7520 will reboot.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at http://kbserver.netgear.com/kb_web_files/open_src.asp
Last Updated:10/17/2025
|
Article ID: 24364