Bug Fixes:
- Wire and wireless clients cannot get IP address from DUT after 28 hours in HOME_IOT test.
- GUI can't be reached when WAN is disconnected.
- Couldn't function after PPPoE connected for 1-2 mins.
- Check firmware version failed on genie in win 7 system or mac system.
- Can't modify wireless Settings success on genie in Android or ipod.
- Can't logged on by genie at very high frequency in android.
- Untranslated string in upgrade detect page.
- Bad performance in HOME_IOT test.
- The wireless mode default value isn't correct.
To Upgrade
To reach the Upgrade menu, click Router Upgrade from the Maintenance section. To upload new firmware:
- Download the firmware and save it to a convenient place such as your desktop. Unzip if needed.
- Using a browser, login to the router as admin.
- Under Maintenance click Router Upgrade.
- Click Browse and locate the upgrade (.img) firmware image file you just downloaded
- Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.
If problems occur after upgrading, try clearing the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (about 10 seconds). Then reenter your configuration information manually.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.