To reset all settings to their factory defaults, use the procedure that is explained in the How do I reset my ReadyDATA storage system to factory default settings? button on the front panel of the ReadyDATA system. The ReadyDATA returns to the factory configuration settings that are shown below:
System Settings
· Device Time: GMT -08:00 Pacific Time (US & Canada); Tijuana
· Services
o SMB: Globally enabled
o AFP: Globally enabled
o NFS: Globally enabled
o FTP: Globally enabled
§ Port Number: 21
§ Authentication Mode: Anonymous
§ Allow upload Resumes: Disabled
§ Passive ports: 32768 - 65535
§ Masquerade address: Disabled
o SNMP: Globally disabled
§ Community: Public
§ Trap destination: Blank
§ Hosts allowed access: Blank
o SSH: Globally disabled
o iSCSI: Globally enabled (nonconfigurable)
o Replicate: Globally disabled
§ User name: Blank
§ Password: Blank
· Language: English
· Host name: RES-followed by the last 6 bytes of the system's primary MAC address
Network settings
· Ethernet interface settings
o MTU: 1500
o Speed(Mpbs): 1000
o Duplex: Full
o Bonding: None
o VNIC: One attached to each interface (for example, vnic0 to eth0 and vnic1 to eth1)
· VNIC settings
o MTU: 1500
o VLAN ID: 0
o Bandwidth limit: None
o TCP/IP: IPv4 with DHCP enabled, and IPv6 disabled
o DNS: No server
Storage settings
· Volumes
o No default volumes
§ Compression: Enabled (nonconfigurable)
§ Deduplication: Enabled (nonconfigurable)
· Shares
o No default shares
§ Logbias: Latency
§ Compression: Disabled (configurable)
§ Deduplication: Disabled (configurable)
§ Protection: Continuous
§ Protection interval: Daily
§ Size: Unlimited access to the storage space on the volume, assigned on demand
§ Access: Denied until you set permissions
· LUNs
o No default LUNs
§ Logbias: Latency
§ Compression: Disabled (configurable)
§ Deduplication: Disabled (configurable)
§ Protection: Continuous
§ Protection interval: Daily
§ Provisioning: Thick
§ Access: Denied until you set permisisons
· Snapshots
o Hourly: On the hour
o Daily: At midnight
o Weekly: At midnight on Friday
Security settings
· Administrative settings
o Username: admin
o Password: password
o Password recovery
§ Question: Blank
§ Answer: Blank
§ Email address: Blank
· Authentication
o Access type: Local users
o Workgroup type: VOLUME
o Default groups: users with GUID 100
o Default users: None
SAN settings
· LUN Groups
o No default group
§ Target: Automatically issued
§ CHAP authentication: Disabled
§ Initiators: None
§ Bidirectional CHAP authentication: Disabled
System monitoring
· Alerts
o Disabled (email, user, and server information is blank)
o Event types: All event types are enabled
· Logs
o Records: Errors, Warnings, and Info enabled
o Categories: All (System, Disk, Volume, Share, Account, and Miscellaneous)
· Status Graphics
o Volume
§ Volume: All volumes
§ Type: Operations
§ Period: 5 minutes
§ Update: 5 seconds
o Network
§ Network: All Ethernet interfaces and VNICs
§ Protocol: All (SMB, NFS, AFP, HTTP, SSH, iSCSI, and SNMP)
§ Period: 5 minutes
§ Update: 5 seconds
o Utilization
§ Volume: All volumes
§ Period: 5 minutes
§ Update: 5 seconds
o Temperature
§ Temperature: All (SYS, CPU, and AUX)
§ Period: 5 minutes
§ Update: 5 seconds