New Features and Enhancements:
- Change "Total Max Concurrent Downloading Tasks" from 3 into 2.
Bug Fixes:
- Fixed account should only support the username with alphabets a-z, and numbers 0-9.
- Fixed: The prompt message is correct while inputting incorrect 3322 username and password.
- Fixed: The DDNS prompt message isn't correct when unplugging WAN port.
- Fixed: The sentences for downloader feature aren't translated completely.
- Fixed: Router missing the http/ftp downloader file type.
- Fixed: The BT file cannot be downloaded, the performance is much lower than BT software.
- Fixed: "Turn E-mail Notification On" check box isn't enabled automatically by clicking "configure email".
- Fixed: Sometimes adding a download task will lead the GUI hang.
- Fixed: Port forwarding should just allow the port range of 1-65534.
- Fixed: When IP-MAC binding feature is disabled, the "Edit" button should be grayed out.
- Fixed: The last device in the IP-MAC binding table should not be deleted.
- Fixed: Can't add QoS rules base on application(port number) and can't delete the selected QoS rule via IE6 browser.
- Fixed: The status for downloading tasks isn't correct while unplugging wan port.
- Fixed: One issue for unplugging USB HDD while downloading.
- Fixed: Only the task at the top of the downloading list has speed, the other two have no speed.
- Fixed: The max downloading speed feature cannot work for downloading tasks.
- Fixed: Adding tasks from USB cannot work well with auto refreshing.
- Fixed: Router cannot support most of the torrent link.
- Fixed: Downloader issue: Delete the file data which is downloading, trying to add the seed to download it, the status would be "Disabled".
- Fixed: Downloader issue: no transmission started for the specific seed.
- Fixed: Downloader issue: after resuming a paused task, a new task with same seed will be created in the list.
- Fixed: Downloader issue: abruptly unplugging NTFS USB dongle caused system hang.
- Fixed: 2.4GHz Guest Network couldn't be associated with.
- Fixed: Turn off Guest Network would cause 2.4GHz Wi-Fi no function.
- Fixed: Port forwarding failed.
- Fixed: The page shows wrong message "HTTPS currently not supported" when add task by BitToerrent Link.
- Fixed: Only one task has download speed when two task in "downloading" status.
- Fixed: The help file function of IGMP doesn't work on WAN Setup page.
- Fixed: There are some string table issues about IGMP.
- Fixed: 'Edit' button doesn't gray out when IP Binding function is disabled.
- Fixed: There are redundant characters '\n\n' in IP Binding page.
To Upgrade:
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/WNDR3400V2/WNDR3400v2-V1.0.0.48.zip
- Log in to the router using a Web browser. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
- Click Maintenance > Router Upgrade
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
- After the router boots up, log in the router again.
You MUST Reset the router to default settings after upgrading the firmware - Click Maintenance > Backup Settings
- Click Erase. The router reboots when the Erase operation is done.
- If you would like to check that the upgrade was successful, log in to the router again at http://192.168.1.1, and check the firmware version.
- Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router.
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.