Note: Please remember to do factory default after firmware upgrade. Enter "Backup Settings" in the web GUI and click "Erase" button of "Revert to factory default settings".
New Features& Enhancements:
- New LTE modem: Yota WLTUBA-107, Huawei M150-1.
- QoS GUI Enhancement: combine quick QoS to original QoS page.
- WDS support WPA-PSK and WPA2-PSK.
- IP-MAC binding: add safety checking mechanism (last device in table will not allowed to be deleted/edited).
Bug Fixes:
- Downloader fixes:
- Change downloader state machine to handle different cases and error behavior
- Update BT client to 2.76
- Remove green download version in router status page
- DUT should try other waiting candidate while some tasks failed
- High priority task cannot continue after unplug and plug USB again
- Finished Emule task will not move to downloaded list
- Downloading rate sometimes cannot be displayed correctly
- GUI sometimes failed t update correct info
- ftp URL very long and include special character cannot be added
- Can't get ftp task size at the beginning
- Downloader taking too much memory, cause wireless driver crash: stop downloader when wireless driver is changing settings
- Change max downloading task from 6 to 3 to optimize performance
- Wireless fixes:
- Fix wireless memory poor issue
- Wireless signal by schedule will not take effect after changing wireless region
- QCA OTP Rx performance issue
- Default 20/40MHz coexistence mode setting is wrong
- VPN passthrough: IPsec VPN still can be connected although disabled the passthrough.
- DDNS script issue cause infinite loop and user cannot access DUT GUI.
- Time machine: when two partition have different access right, there is problem.
- GUI issues:
- Some string fixes
- RU 4G GUI fixes
- Help fixes
- Partially improve DUT GUI speed
Known Issues:
- Download history list disappear after hot unplug/plug the HD again.
- ReadySHARE Cloud - cannot register.
- Downloader: task cannot resume after FW upgrade.
- Downloader: Save path issue + task resume issue.
- Click 'Check' Button should trigger the WAN connection.
- Home page is blank briefly after updating string table.
- Cannot add BT task in green download management.
To Install:
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is WNDR4300-V1.0.1.64PRRU.img
Download Link: http://www.downloads.netgear.com/files/GDC/WNDR4300/WNDR4300-V1.0.1.64PRRU.zip - Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
- Click ADVANCED tab > Administration > Firmware Upgrade.
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.
Important Note:
- The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page