Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

You can obtain information about the status of your storage system by reviewing the indicators listed in the following table.

 

ReadyNAS 102 indicator descriptions

Indicator

Description

Power button and LED

Press this button to turn on the ReadyNAS. The LED has these states:

  • On. Powered on.
  • Blinking. Booting or shutting down.
  • Off. Powered off.

Disk LEDs (1, 2)

Each drive bay has an LED associated with it on the front panel of the storage system. The disk LEDs have these states:

  • On. Power is on and the disk is operating normally.
  • Blinking. The disk was removed, failed, or is resynchronizing.
  • Off. The drive bay is empty.

Disk activity LED

The disk activity LED has these states:

  • On. At least one disk is present.
  • Blinking. A disk is active.
  • Off. No disks are present.

Rear panel Ethernet port LEDs

Two LED status indicators are built into this port, one green and one amber. They indicate port speed and activity as follows:

  • Green on, amber off. 1000 Mbps connection speed, no activity.
  • Green blinking, amber off. 1000 Mbps connection speed, activity.
  • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity.
  • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity.
  • Green off, amber off. No connection.

 

This article applies to the ReadyNAS 102 desktop storage system.

Last Updated:07/07/2025 | Article ID: 23013

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email