Follow these instructions to set up your ReadyNAS system using the RAIDar utility.
Note: These instructions are for users who do not have Internet access. If you have Internet access, NETGEAR recommends that you use ReadyCLOUD to set up your ReadyNAS system. To set up your system using ReadyCLOUD, follow the instructions on the installation guide that came with your system.
Note: These instructions assume that at least one disk is installed in the system. If you have a diskless system, you must install at least one disk before following these instructions. For information about installing disks, see the hardware manual for your system.
Set up your storage system
Place your system in a location that provides adequate ventilation.
High-capacity disks can produce considerable heat. It is important to ensure that the fan exhausts are unobstructed.
For a complete list of placement considerations, see the hardware manual for your system.- Connect the power adapter to the back of the system and plug the other end into a wall outlet or power strip.
- Use an Ethernet cable to connect an Ethernet port on the storage system to your network.
If necessary, press the Power button to turn on the system.
It takes about a minute to start up. The IP address is retrieved using DHCP.Install and run the RAIDar utility on a computer that is connected the same local area network (LAN) as your ReadyNAS system.
- Click the Setup button.
An SSL certificate security warning displays. This warning ensures an encrypted authentication and secure access to the local admin page for your storage system. - Accept the certificate.
A login prompt displays. - Enter admin for the user name, enter password for the password, and click the OK button.
You can change these credentials when you configure your system. NETGEAR recommends that you change your password as soon as possible.
The ReadyNAS local admin page displays in your browser. It automatically launches a Setup Wizard to guide you through the configuration process.
RAIDar is on the resource CD that came with your system. It includes versions for Windows, Mac, and Linux operating systems.
RAIDar automatically detects your ReadyNAS system on the network.
The information that RAIDar displays is specific to your ReadyNAS system.