New Features and Enhancements:
- HT20/HT40 co-existence.
- Win8 support/cert.
- WPS PIN attack protection.
- WAN gateway IP with different subnet.
- Wireless off GUI display and behavior.
Known issues & Bugs:
- Fix USB HDD should support GPT partition with 4096 byte sector size
To Upgrade
Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Download the firmware and save it to a convenient place such as your desktop. Unzip if needed.
- Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
- Click Maintenance > Router Upgrade
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.
Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page