New Features:
- Add product registration feature.
Bug Fixes:
- Fix the problem that the switch does not reject wrong certificate files.
- Fix the problem that the switch reboots after enabling HTTPS by downloading certificate files generated from NETGEAR managed switch.
- Fix the problem of switch not able to obtain IP address from some DHCP server. This particular DHCP server requires the source address from the DHCP discovery packet to be 0.0.0.0.
- Fixed the problem that LAG interface cannot be selected as Source or Destination Port Members in Security > Traffic Control > MAC Filter > MAC Filer Configuration page.
- Fixed the problem that the switch does not try to obtain time from SNTP server anymore if the SNTP server is rebooted. When this happens, status of "Kiss of Death" is shown in the "Last Attempt Status" column of SNTP Server Status under System > Management > Time > SNTP Server Configuration page.
- Fixed the issue of network converging time is too slow with RSTP. When RSTP is enabled in a looped network, it still took more than 30 seconds to recover once the active forwarding link is disconnected.
- Fixed the problem that the switch still sends out RADIUS accounting packet even when port authentication fails.
- Fixed the problem that when 802.1x client sends user name with 39 characters to switch, but the switch will only send 31 characters to Radius server for authentication.
- Fixed the problem that DiffServ policy entry (QoS > DiffServ > Advanced > Policy Configuration) can't be deleted if the policy name contains "-".
- Fixed the problem that excessive VoIP traffics with Auto-VoIP enabled could cause the switch to reboot or making the WEB GUI inaccessible after some period of time.
- Fix the problem that the value of LAG interface counter in MIB object (ifHCInoctets) is cut off when it's over 4,294,967,296 (2^32).
- Fixed the issue of storm control behavior is incorrect. When broadcast storm control is enabled in a port, the threshold is 20% of port speed and action is shutting down, the port's link will down and up, back and forth once it detects 15% broadcast packets.
- Change default setting of Auto-VoIP (Switching > Auto-VoIP > Auto-VoIP) from enable to disable.
Known issues:
- Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically changed back to 1 after its associated VLAN is deleted.
Workaround: Manually change the PVID back to 1.
Upgrade Instructions:
- Download using the button below, saving to a convenient place such as your desktop.
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page
Last Updated:10/17/2025
|
Article ID: 22175