Enterprise AV Home WiFi Mobile Wifi Support Shop Deals

The following example creates two groups. Group 1 is in community mode, and Group 2 is in isolated mode.

  1. Enter the following commands.

    (Netgear Switch) #
    (Netgear Switch) #vlan data
    (Netgear Switch) (Vlan)#vlan 200
    (Netgear Switch) (Vlan)#exit

    (Netgear Switch) #config
    (Netgear Switch) (Config)#interface 1/0/6
    (Netgear Switch) (Interface 1/0/6)#vlan participation include 200
    (Netgear Switch) (Interface 1/0/6)#vlan pvid 200
    (Netgear Switch) (Interface 1/0/6)#exit

    (Netgear Switch) (Config)#interface 1/0/7
    (Netgear Switch) (Interface 1/0/7)#vlan participation include 200
    (Netgear Switch) (Interface 1/0/7)#vlan pvid 200
    (Netgear Switch) (Interface 1/0/7)#exit
    (Netgear Switch) (Config)#interface 1/0/16
    (Netgear Switch) (Interface 1/0/16)#vlan participation include 200
    (Netgear Switch) (Interface 1/0/16)#vlan participation pvid 200
    (Netgear Switch) (Interface 1/0/16)#exit

    (Netgear Switch) (Config)#interface 1/0/17
    (Netgear Switch) (Interface 1/0/17)#vlan participation include 200
    (Netgear Switch) (Interface 1/0/17)#vlan pvid 200
    (Netgear Switch) (Interface 1/0/17)#exit
     
  2. Create a VLAN 200 and include 1/0/6,1/0/7, 1/0/16, and 1/0/17.

    (Netgear Switch) (Config)#
    (Netgear Switch) (Config)#private-group name group1 1 mode community
     
  3. Create a private group in community mode.

    (Netgear Switch) (Config)#private-group name group2 2 mode isolated
     
  4. Create a private group in isolated mode.

    (Netgear Switch) (Config)#interface range 1/0/6-1/0/7
    (Netgear Switch) (conf-if-range-1/0/6-1/0/7)#switchport private-group 1
    (Netgear Switch) (conf-if-range-1/0/6-1/0/7)#exit
     
  5. Add 1/0/16 and 1/0/7 to the private group 1.

    (Netgear Switch) (Config)#interface range 1/0/16-1/0/17
    (Netgear Switch) (conf-if-range-1/0/16-1/0/17)#switchport private-group 2
     
  6. Add 1/0/16 and 1/0/7 to the private group 2.

    (Netgear Switch) (conf-if-range-1/0/16-1/0/17)#exit


For more information, see the following support articles:

 

 

This article applies to the following managed switches and their respective firmware:

 

 

  • M5300 - firmware version 10.0.0.x
    • M5300-28G (GSM7228S)
    • M5300-5G (GSM7252S)
    • M5300-28G3 (GSM7328Sv2h2)
    • M5300-52G3 (GSM7352Sv2h2)
    • M5300-28G_POE+ (GSM7228PSv1h2)
    • M5300-52G-POE+ (GSM7252PSv1h2)
    • M5300-28GF3 (GSM7328FSv2)
  • M4100 - firmware version 10.0.1.x
    • M4100-26G (GSM7224v2h2)
    • M4100-50G (GSM7248v2h2)
    • M4100-26G-POE (GSM7226Pv1h1)
    • M4100-50G-POE+ (GSM7248Pv1h1)
    • M4100-26G-POE (FSM7226Pv1h1)
    • M4100-50-POE (FSM7250Pv1h1)
    • M4100-D12G (GSM5212v1h1)
    • M4100-D10-POE (FSM5210Pv1h1)
  • M7100 - firmware version 10.0.1.x
    • M7100-24X (XSM7224)
  • XSM7224S - firmware version 9.0.1.x
Last Updated:07/07/2025 | Article ID: 21944

This article applies to:

Recently Viewed Articles

    Our team is here to help!

    Phone
    Chat
    Email