How do I configure time-based sampling of counters with sFlow using the web interface on my managed switch? - NETGEAR Support

Configure thesampling ports sFlow receiver index, and polling interval.
1. Select Monitoring > sFlow > Advanced > sFlow Interface Configuration.
2. Select the Interface 1/0/1 check box.
3. In the Poller Interval field, enter 300. A screen similar to the following displays.
4. Click Apply.

For more information, see the following support articles:

What is sFlow and how does it work with my managed switch?

This article applies to the following managed switches and their respective firmware:

M5300 - firmware version 10.0.0.x
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
M4100 - firmware version 10.0.1.x
- M4100-26G (GSM7224v2h2)
- M4100-50G (GSM7248v2h2)
- M4100-26G-POE (GSM7226Pv1h1)
- M4100-50G-POE+ (GSM7248Pv1h1)
- M4100-26G-POE (FSM7226Pv1h1)
- M4100-50-POE (FSM7250Pv1h1)
- M4100-D12G (GSM5212v1h1)
- M4100-D10-POE (FSM5210Pv1h1)
M7100 - firmware version 10.0.1.x
- M7100-24X (XSM7224)
XSM7224S - firmware version 9.0.1.x

Last Updated:07/07/2025 | Article ID: 21922

Recently Viewed Articles

Our team is here to help!

Phone

Chat

Email