How do I renumber stack members using the web interface on my managed switch? - NETGEAR Support

Renumber the stacking member’s ID from 3 to 2.
1. Select System > Management > Basic > Stack Configuration.
  
  A screen similar to the following displays.
2. Under Stack Configuration, scroll down and select the Unit ID 3 check box.
3. In the Unit ID list, select 2.
4. Click Apply.
5. Now the unit ID of the stacking member is 2.

For more information see the How do I renumber stack members using CLI commands on my managed switch? support article.

This article applies to the following managed switches and their respective firmware:

M5300 - firmware version 10.0.0.x
- M5300-28G (GSM7228S)
- M5300-5G (GSM7252S)
- M5300-28G3 (GSM7328Sv2h2)
- M5300-52G3 (GSM7352Sv2h2)
- M5300-28G_POE+ (GSM7228PSv1h2)
- M5300-52G-POE+ (GSM7252PSv1h2)
- M5300-28GF3 (GSM7328FSv2)
XSM7224S - firmware version 9.0.1.x

Last Updated:07/07/2025 | Article ID: 21908

Recently Viewed Articles

Read this article in another language:

Our team is here to help!

Phone

Chat

Email