How do I show logging using the web interface on my managed switch?

Configure the syslog.
1. From the main menu, select Monitoring > Logs > Sys Log Configuration.
2. In the Syslog Configuration, next to the Admin Status, select the Enable radio button.
3. Click Apply.
Configure the command log.
1. Select Monitoring > Logs > Command Log.
2. Under Command Log, for Admin Status, select the Disable radio button.
3. Click Apply.
Configure the console log.
1. Select Monitoring > Logs > Console Log.
2. Under Console Log Configuration, for Admin Status, select the Disable radio button.
3. Click Apply.
Configure the buffer logs.
1. Select Monitoring > Logs > Buffer Logs.
  
  A screen similar to the following displays.
2. Under Buffer Logs, for Admin Status, select the Enable radio button.
3. Click Apply.

For more information, see the following support articles:

This article applies to the following managed switches and their respective firmware:

Last Updated:07/07/2025 | Article ID: 21866