New features:
- IPv6 Firewall support.
- IPv6 Prefix Delegation.
- IPv6 IPSEC and SSL VPN.
- Multiple SSID for wireless.
- CLI Support
Bug Fixes:
- Loopback does not work for DMZ LAN.
- When click Auto detect button on wan settings page,lan can not connect internet for more than 7minutes.
- Can't establish tunnel that use Radius-PAP authentication.
- Ping using Diagnostic tool in GUI fails over ipv6 ipsec tunnel.
- Sometimes,sync time need to wait a long time.
- Can't config FQDN in 'Add New VPN Policy' page.
- DMZ WAN also can not connect after added route.
- Can't config IPSec "client to gateway" vpn that use IPv6 address in VPN Wizard page.
- Can not add the customer vlan when whose DHCP server is disabled and can not disable the DHCP server of default vlan.
- Unit shows critical error when capture packets.
- Can not configure LAN DHCP relay.
Known Issues:
- Support Microsoft Visual C++ 2005 or SP1 redistributable library is only supported when you use a client PC to establish SSL VPN tunnels.
- Some wireless profile authentication mode, wps use pbc and the pin function does not work.
- L2TP IP address is not released even when the client becomes inactive.
- When Firefox establishes a vpn tunnel the publisher is displayed as unknown.
- Users can have problems browsing the SSL VPN portal with JDK7.
- Administrator privilege is required to use aSSL VPN tunnel on Windows 7.
- SSL VPN client IP address range configuration can be lost after upgrading from v4.0.1-67.
- The ping result is incorrect when mtu >1466 of PPTP or PPPoE.
- The "Number of packets dropped due to session limit" is wrong after upgrading from v4.0.1-67 to v4.1.1-5.
- The TimeZone in the CLI is incorrect.
- In IPV6, IPsec VPN Pass through cannot establish a tunnel.
- The LAN group 'Reserved ip' function is invalid.
- IPV4/IPV6 DMZ-WAN outbound block rules do not record logs on the log page.
- "Packets Dropped due to IP_MAC Binding violation" statistic display is wrong.
- You cannot modify the port number for IPV6 https management.
- When the WAN port IPv6 address is a static IPv6 address, the Secondary DNS Server cannot be blank.
- After deleting DMZ port RADVD prefixes, the DMZ interface IPv6 address of the RADVD prefixes still exists in the Router Status page and Detailed Status page.
- You cannot capture the packets from dmz port in Diagnostics.
- You cannot record the dhcp server log in Firewall logs&email when the dhcp server is selected.
- The CLI has no the command to configure the 'Wireless logs' in Monitoring->Firewall logs&Email.
- The traffic meter 'start date/time' does not change when the DUT time is changed.
CLI Issues:
- Edit schedule is invalid in some telnet sessions.
- If you enter 'show net wan wan1 ipv4 status' in the cli, the secondary dns is displayed as the ipv6 secondary dns when the secondary dns is not configured.
- Cannot add/modify the static routing in CLI with the interface 'wan'.
- The cli “change user type” command fails.
- You cannot set pppoe with a static ip in CLI mode.
- The CLI has no the command to configure the 'Wireless logs' in Monitoring->Firewall logs&Email..
To Upgrade
IT IS VERY IMPORTANT TO NOT POWER-CYCLE THE UNIT BEFORE THE UPGRADE COMPLETES! IF YOU DO INTERRUPT THE UPGRADE, THE ROUTER WILL BE RENDERED USELESS!
- Select the download appropriate to your region, and download to a convenient place such as your desktop.
27.5 MB - Using a browser, login to the router as admin.
- Under Management, click Router Upgrade.
- Click Browse and locate the upgrade file you just downloaded
- Click Upload. The upgrade process may take up to ten minutes or more; in rare cases it might take even longer.
- Please wait for the yellow TEST LED to turn off before connecting to the GUI again.
- Once the upgrade is complete, the browser may show an error page (404 – Page not found). At this point, please connect to http://192.168.0.1 to access the new GUI.
For problems after upgrading, clear the configuration, using the Factory Defaults pushbutton on the rear panel, or the Erase button in the Backup Settings menu. Then reenter your configuration information manually.
Last Updated:10/17/2025
|
Article ID: 20867