New Features and Changes:
- Add a new option “any” to IGMP Snooping Static Router Port selection (System > MultiCast > IGMP Snooping). When selected, IGMP control packets are flooded to all ports.
- Increase the DHCP timeout time from 15 seconds to 60 seconds
Modifications / Fixes:
- Fix the issue when IGMP Snooping and Block Unknown Multicast Address (System > MultiCast > IGMP Snooping) are disabled, the following multicast MAC addresses are not being forwarded: 01:00:5E:00:00:01, 01:00:5E:00:00:02 and 01:00:5E:00:00:16.
- Fix the issue when port-based VLAN is enabled, multicast packets with destination IP 01:00:5E:00:00:03 to 01:00:5E:00:00:FF and 01:005E:7F:FF:FA are flooded across all VLANs.
- Fix the issue that incoming VLAN Tagged packets with the following destination MAC addresses are forwarded out even when the receiving port is not in the same VLAN group as the VLAN Tag: 01:00:5E:00:00:03 to 01:00:5E:00:00:0F and 01:00:5E:7F:FF:FA.
- Fix the issue when Block Unknown Multicast Address (System > MultiCast > IGMP Snooping) is enabled, packets with the following destination MAC are blocked: 01:80:C2:00:00:00 ~ 01:80:C2:00:00:0F.
Known issues:
None.
Limitations:
None.
Installation Instructions
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
Download Link: http://www.downloads.netgear.com/files/GDC/GS105E/GS105E_V1.01.25.zip
- Start ProSAFE Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
- The ProSAFE Plus Utility will scan and detect ProSAFE Plus switches on your network. Select the switch to upgrade by clicking on the radio button next to the switch. Enter the administrator password of the switch when prompted.
- Select Maintenance under the System tab. Click on Firmware Upgrade and Browse to the location when the firmware image is saved.
Last Updated:10/17/2025
|
Article ID: 20842