Note: This article dates from Sept 2012. UTM current Firmware in Jan 2014 are V3.5.2-14
Editor Jan 2014.
Resolved issues (since v1.3.15-28):
- Added the ability for admin users to pull information from the UTM packet capture feature.
- Fixed UTM security vulnerability where the HTTPS scan service may allow a user to pull information from the UTM and execute custom code.
- Fixed the "operation failed" message being misreported on the Users->Configuration page.
- Fixed issue where the user would be unable to delete or add trusted/untrusted certificates to/from the trusted list.
- Fixed issue where an "operate fail" message would be falsely displayed in the report GUI after the user clicks "send now".
- Fixed issue where the LAN, WAN, and Time Zone settings could not be changed in the setup wizard.
- Fixed the issue where the actual UTM did not reboot even though the page showed the UTM rebooting.
- Fixed the issue where the user was unable to query the traffic log after restoring the configuration from a backup file.
Known Issues:
- Not able to hear voice after call is established from dmz to lan with server on wan side and dmz side.
- SNMP productid is still showing UTM100's productid for UTM150 DUT.
Caveats:
When installing SSLvpn, if there is a failure, a cache clean-up of the SSL-VPN adaptor is necessary. Use one of the following URLs to initiate the cleanup:
- For 32-bit PCs, select the following url:
https://<device IP>scgi-bin/users_portal/removeactivex?launch=true&is32bit=true - For 64-bit PCs, select the following url:
https://<device IP>/scgi-bin/users_portal/removeactivex?launch=true&is32bit=false
To Install
Firmware upgrade from update server:
================================
- Installed firmware versions older than 1.3.7:
If your firmware is older than 1.3.7 (<1.3.7) it cannot be updated directly to firmware newer than 1.3.7. Only firmware images older than 1.3.7 will be displayed when you query the update server (Application=>System Update=>Firmware). To upgrade to firmware newer than 1.3.7 you must first upgrade your system to 1.3.7. You can then perform the firmware update query again to display the newer firmware images (Application=>System Update=>Firmware). - Installed firmware versions 1.3.7 and above:
If your firmware is version 1.3.7 or above, when you query the update server all firmware versions will be displayed.
- Download the file, unzip it and follow the instructions provided in the user manual to upload the firmware.
-
154 MB
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page