Resolved issues (since v1.3.15-14):
- Corrected copyright year display.
- Fixed SSL VPN connection failures in Window 7 Ultimate 64-bit.
- Fixed issue where multiple consecutive installs and uninstalls of the SSL VPN client will cause the CPU to run at 100%.
- The UTM can now accept x.x.x.255 as the input in the WAN IP address field.
- Corrected the locations where the dbglog and utm_log are saved.
- Corrected a spelling error in the system log.
- Fixed an issue where the SSL-VPN tunnel is not getting established for custom HTTPS ports (non-port 443) in Mac OS.
- DHCP lease records are now displayed on a new dedicated page in the Web UI.
- Added uninstall SSL-VPN Tunnel icon to the UTM GUI in addition to the existing option of uninstalling by URL.
- Disabled logs are no longer sent to the syslog server.
- Fixed the issue where an FTP download may fail after an extended amount of time in certain circumstances.
- Fixed HTTP to HTTPS redirection issue where some HTTP to HTTPS redirects would fail.
- Fixed the issue where a malformed filename causes HTTP intermittent failure and device lockup.
Known Issues:
- Not able to hear voice after call is established from dmz to lan with server on wan side and dmz side.
- SNMP productid is still showing UTM100's productid for UTM150 DUT.
Caveats:
When installing SSLvpn, if there is a failure, a cache clean-up of the SSL-VPN adaptor is necessary. Use one of the following URLs to initiate the cleanup:
- For 32-bit PCs, select the following url:
https://<device IP>/scgi-bin/users_portal/removeactivex?launch=true&is32bit=true - For 64-bit PCs, select the following url:
https://<device IP>/scgi-bin/users_portal/removeactivex?launch=true&is32bit=false
To Install
Firmware upgrade from update server:
================================
- Installed firmware versions older than 1.3.7:
If your firmware is older than 1.3.7 (<1.3.7) it cannot be updated directly to firmware newer than 1.3.7. Only firmware images older than 1.3.7 will be displayed when you query the update server (Application=>System Update=>Firmware). To upgrade to firmware newer than 1.3.7 you must first upgrade your system to 1.3.7. You can then perform the firmware update query again to display the newer firmware images (Application=>System Update=>Firmware). - Installed firmware versions 1.3.7 and above:
If your firmware is version 1.3.7 or above, when you query the update server all firmware versions will be displayed.
- Download the file, unzip it and follow the instructions provided in the user manual to upload the firmware.
-
154 MB
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.