- NetBIOS name login is not supported in the initial release. The only way to access the device is to use its IP address. Therefore, it is not recommended to enable the DHCP client, unless you can determine what IP address is assigned to the WN802T from the DHCP server.
- If you have a wired Ethernet connection faster than 100 Mbps, reinstalling might fail. If this happens use a slower connection, for example by putting a 10 Mbps hub, between your computer and the WN802T access point.
These light statuses are slightly more up-to-date than the manual.
| Light Activity | What the Access Point is Doing | |
| Power LED (top) | Off | The access point has no power. |
| Solid amber | Normal booting is underway. | |
| Blinking amber | Firmware upgrade is in process. | |
| Solid green | Normal running state. | |
| Blinking green | Resetting to factory defaults. | |
| Ethernet | Off | No connection or no power. |
| Solid amber | The Ethernet port is connected at 10 or 100 Mbps. | |
| Solid green | The Ethernet port is connected at 1000 Mbps. | |
| Blinking amber or green | Transmitting data. | |
| Wireless LED | Blinking blue | Sending or receiving wireless data. |
N101633.asp June 22, 2006
Last Updated:07/07/2025
|
Article ID: 151