Release Date:
January 19, 2026.
Bug Fixes:
- Fixes the issue where certain configurations were removed after device reboot when running firmware v7.1.1.12.
Security Fixes:
This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Warnings:
Read and follow these warnings before you update a firmware version that is earlier than version 7.0.8.4 to version 7.0.8.4 or a later version:
- After you update the firmware to version 7.0.8.4 or a later version, we recommend that you do not downgrade to version 7.0.7.X or an earlier version.
- Because HTTPS is disabled by default since version 7.0.6.2, the device UI login page does not display automatically after you use HTTPS to update to version 7.0.8.4 or a later version. Open a new web browser tab and enter the switch IP address to access the login page.
- After you manually enable HTTPS, if you access the device UI via HTTP, you are automatically redirected to HTTPS.
- The SNMPv1 and SNMPv2 default community strings Private and Public are not available in version 7.0.8.4 or a later version. We recommend that you set a different community string before updating the firmware.
- The authentication protocol for SNMPv3 automatically changes to MD5 if the current setting is None. After the firmware upgrade, reconfigure the authentication protocol for SNMPv3.
- The default setting for the Smart Control Center (SCC) management option changes from enabled to disabled.
Note: The SCC Utility can still discover the switch.
Download Link: https://www.downloads.netgear.com/files/GDC/GS108Tv3/GS108Tv3_GS110TPv3_GS110TPPv1_V7.1.1.13.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.