Features and Enhancements:
The AV UI provides the following enhancements:
- New password policy: When you create or change a password on the AV UI, a new password policy applies. The password must be 8 to 64 characters in length and must contain at least one uppercase letter, one lowercase letter, and one number.
Bug Fixes:
- Fixes the issue where unknown multicast traffic traps to the CPU, causing packet drops.
- Fixes the issue where there is a number overflow in the memory display.
- Fixes the issue where the Engage Controller cannot discover the M4500 switch.
Known Issues:
- If you use the AV UI to create a manual LAG, PTP TC is not enabled if PTP TC profiles are present.
Workaround: Use the Main UI or CLI to enable PTP TC. - Before firmware version 7.0.3.21, firmware upgrade fail if the filename exceeds 32 characters.
- If you downgrade from version 7.0.4.12 to version 7.0.3.21 or earlier, all profiles convert to data profiles
- If you manage the switch over a management VLAN port that is part of a BirdDog AV Network profile or Crestron DigitalMedia AV Network profile, you cannot enable the DHCP server.
Workaround: Use the OOB port to manage the switch or configure the DHCP server with a non-management VLAN for the BirdDog AV Network profile or Crestron DigitalMedia AV Network profile. - For units in a stack, a profile that you configure in the AV UI on the stack management switch cannot synchronize to the stack members. The profile on the stack members becomes a data profile.
Workaround: Create a profile in the AV UI separately on each unit in the stack. - The M4500 is offline and inaccessible after you change the management VLAN in the Engage Controller.
Workaround: Do not change the management VLAN when the M4500 is on site, or manually add the VLAN to the interface using the CLI. See the below example:
(Switch) (Interface) # switchport allowed vlan add X
(Switch) (Interface) # switchport native vlan X - When you create a profile for the AVoIP Lightware AV network with Lightware UBEX, the Lightware devices (UBEX Encoder/Decoder) with a 2x10G fiber link cannot automatically form a manual LAG on the M4500.
Workaround: Manually create a LACP LAG (default LAG mode in AV UI) for the detected UBEX 2x10G fiber link.
Download Link: https://www.downloads.netgear.com/files/GDC/M4500/CSM4532_XSM4556_V7.0.4.23.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
You can update the firmware through the AV UI.
Last Updated:07/07/2025
|
Article ID: 000066651