New Features:
- Support for Canada, Australia, New Zealand, Singapore for both the WBE710 and WBE718 APs.
- Improved RF channel assignment and TX power allocation.
- Enhancements for 802.11v WiFi network management (assisted roaming).
- Optimization for the Instant Mesh feature.
- Improvements to the LED behavior during the boot process.
- Default LLDP interval changed from 5 seconds to 30 seconds.
- Enhancements in automatic channel selection.
- Support for the Speed Test feature.
- Support for MPSK group isolation.
- Support for WDS manual root selection.
Features Changes:
- NAT mode support disabled for India.
Bug Fixes:
- Fixes an issue where the AP is not operating on the automatically selected channel for the 6 GHz radio.
- Fixes an issue where a captive portal is not working for SSIDs that are configured for multi-link operation (MLO) and a non-default VLAN.
Known Issue:
- An iPhone cannot connect when the authentication is configured as WPA2/WPA3 personal (mixed authentication), and multi-link operation (MLO) is enabled.
Workaround: Change the authentication to WPA3 personal. - The ARP proxy feature does not work if you add a rule that denies (drops) ARP packets in the MAC IP Traffic Filter.
- On the client statistics page of the UI, channel utilization might increase beyond 100%.
Download Link: https://www.downloads.netgear.com/files/GDC/WBE718/WBE710_WBE718_V11.7.0.12.zip
Firmware Update Instructions:
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.
Last Updated:07/07/2025
|
Article ID: 000066582