New Features and Enhancements:
- New responsive user interface (UI) that can adjust to the size of your screen
- Addition of bidirectional synchronization of the configuration settings between NETGEAR Insight and the device UI
- Addition of online checks for new firmware updates
- Update to the Dashboard page in the device UI
- NETGEAR Insight management mode is now enabled by default
- You can now use the new NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight app to discover the switch in the same subnet. The NDT supports UPnP, which is the preferred method of discovery.
Warnings:
Read and follow these warnings before updating the firmware:
- Do not use the NETGEAR Switch Discovery Tool (NSDT) to discover the switch because it is no longer supported since firmware version 7.1.0.7. Use the NETGEAR Discovery Tool (NDT) or the latest NETGEAR Insight App to discover the switch.
Read and follow these warnings before you update a firmware version that’s earlier than version 7.0.8.4 to version 7.0.8.4 or a later version:
- After you update the firmware to version 7.0.8.4 or a later version, we recommend that you do not downgrade to version to 7.0.7.X or an earlier version.
- Because HTTPS is disabled by default since version 7.0.6.2, the device UI login page does not display automatically after you use HTTPS to update to version 7.0.8.4 or a later version. Open a new web browser tab and type the switch’s IP address to access the login page.
- After you manually enable HTTPS, if you access the device UI via HTTP, you are automatically redirected to HTTPS.
- The SNMPv1 and SNMPv2 default community strings Private and Public are not available in version 7.0.8.4 or a later version. We recommend that you set a different community string before updating the firmware.
- The authentication protocol for SNMPv3 automatically changes to MD5 if the current setting is None. After the firmware upgrade, reconfigure the authentication protocol for SNMPv3.
Download Link:
https://www.downloads.netgear.com/files/GDC/GS108Tv3/GS108Tv3_GS110TPv3_GS110TPPv1_V7.1.0.7.zip
Firmware Update Instructions:
The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.
To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.